Hargreaves Halifax HD10001 250mm Cast Iron Grey Double Spigot Drain Pipe 3m
Unavailable for Online Ordering
Call for Availability250mm Halifax Drain double spigot pipe for buried below ground drainage.
- Diameter - 250mm nominal bore (DN250), 276.5mm maximum outside diameter.
- Length - 3 metre standard length; the uniform bore means it can be cut at any point and still seat correctly in a coupling.
- Material - Cast in grey iron to the BS EN 877 standard, with a minimum average 150 micron 2-pack epoxy finish.
- Fire performance - Rated A2-S1,d0 for fire performance, meaning no significant contribution to fire and minimal smoke.
- Standards - Meets BS EN 877:1999+A1:2006 and BS EN 877:2021 in full, with third party BSI Kitemark certification.
The Halifax HD10001 is one of the Halifax Drain range from Hargreaves Foundry: a 250mm double spigot pipe for buried below ground drainage and wastewater systems, jointed using a separate coupling rather than a traditional spigot and socket.
Material and coating
- Casting - Cast in grey iron to the BS EN 877 standard, with a minimum average 150 micron 2-pack epoxy finish.
- Internal coating - Minimum average 130 microns of yellow 2-pack epoxy, tested for chemical resistance between pH2 and pH12 and a 30 day waste water test at 23C.
- Length - 3 metre standard length; the uniform bore means it can be cut at any point and still seat correctly in a coupling.
Manufacturing quality
The Halifax Drain manufacturing site holds ISO 9001:2015 certification through the UKAS-accredited Beijing United Intelligence Certification Co. Ltd, and is separately audited by BSI as part of the Kitemark process. Samples from every delivery are checked for dimensional accuracy, coating quality and chemical and physical properties, over and above the requirements of the standard itself.
Installation
- Cutting - Pipes can be cut to length on site using a powered chop saw or disc cutter fitted with a metal cutting disc; cut ends should be touched up with a high quality metal primer once burrs are removed.
- Jointing - Connects to other Halifax Drain pipes and fittings using 250mm Halifax ductile iron or push fit couplings, not a caulked socket joint.
Full dimensions, coating specifications and installation guidance are set out in the manufacturer's Halifax Technical Guide.