Hargreaves Halifax HD10048 250mm x 200mm Cast Iron Grey Pipe Taper
Product Code:
GIB01850
£288.91
£240.76
Unavailable for Online Ordering
Call for Availability250x200mm pipe taper for reducing a Halifax Drain run from 250mm down to 200mm.
- Reduction - Steps a run down from 250mm to 200mm nominal bore.
- Material - Cast in grey iron to the BS EN 877 standard, with a minimum average 150 micron 2-pack epoxy finish.
- Jointing - Connects using the 250mm coupling at the larger end and the 200mm coupling at the smaller end.
Read More
More Information
The Halifax HD10048 sits within the Halifax Drain range: a 250x200mm pipe taper, used to step a run down from 250mm to 200mm nominal bore, for example where a branch or gully feeds into a smaller diameter main run.
Construction
- Material - Cast in grey iron to the BS EN 877 standard, with a minimum average 150 micron 2-pack epoxy finish.
- Jointing - The 250mm end connects using a standard 250mm Halifax coupling, and the 200mm end using a standard 200mm coupling.
Cutting on site
Where a length needs to be shortened on site, Hargreaves recommend a powered chop saw or disc cutter fitted with a metal cutting disc rather than a hand hacksaw; burrs should be removed and any exposed metal touched up with a high quality metal primer before the joint is made.
Full dimensions are set out in the manufacturer's Halifax Technical Guide.
Reviews
Delivery Information