Hargreaves Halifax HD10049 250mm Cast Iron Grey Rectangular Door Access Pipe
Unavailable for Online Ordering
Call for Availability250mm access pipe with a bolted rectangular door, giving a wide rodding and inspection point along a Halifax Drain run.
- Access - Bolted rectangular door, wider than the round door version, for rodding and inspection.
- Diameter - 250mm nominal bore, matching the Halifax Drain range.
- Material - Built from grey cast iron conforming to BS EN 877, coated to a minimum average thickness of 150 microns.
The Halifax HD10049 belongs to the Halifax Drain range: a 250mm access pipe with a bolted rectangular door, giving a wider access point than the round door version for rodding and inspection within a buried run.
Why rectangular
The rectangular door opening gives more clearance for rodding equipment than the round door access pipe of the same diameter, which can help on runs that see frequent maintenance.
Construction
- Material - Built from grey cast iron conforming to BS EN 877, coated to a minimum average thickness of 150 microns.
- Door - Bolted rectangular door, sealed with a gasket.
Chemical exposure
Halifax Drain's coatings are tested to withstand chemical exposure between pH2 and pH12, covering the range of household and commercial waste likely to reach a buried drainage run, alongside a 30 day waste water immersion test at 23C and cyclic temperature testing between 15C and 93C.
Full dimensions are set out in the manufacturer's Halifax Technical Guide.