Hargreaves Halifax HD12005 300mm Cast Iron Grey Short Radius Bend 45 Degree
Product Code:
GIB01900
£468.04
£390.03
Unavailable for Online Ordering
Call for Availability300mm short radius bend at 45 degrees, for a Halifax Drain run.
- Angle - 45 degree short radius bend.
- Diameter - 300mm nominal bore, matching the Halifax Drain pipe range.
- Material - Produced in grey cast iron under BS EN 877, with an epoxy finish averaging no less than 150 microns.
- Design - The short radius sweep keeps the fitting compact where space is tight, and is the standard choice for angles under 90 degrees where a full long radius bend is not needed.
Read More
More Information
The Halifax HD12005 sits within the Halifax Drain range: a 300mm, 45 degree short radius bend, used to change the direction of a buried drainage run.
Design
- Geometry - The short radius sweep keeps the fitting compact where space is tight, and is the standard choice for angles under 90 degrees where a full long radius bend is not needed.
- Material - Produced in grey cast iron under BS EN 877, with an epoxy finish averaging no less than 150 microns.
Ground movement
Cast iron expands by around 0.01mm per metre for every degree Celsius rise in temperature, a coefficient close to that of concrete and steel. In practice this means a buried Halifax run moves very little relative to the ground around it, unlike some plastic systems where thermal expansion can be five to twenty times greater.
Installation
- Jointing - Connects to Halifax Drain pipes using the same ductile iron or push fit couplings as the rest of the range.
See the manufacturer's Halifax Technical Guide for full dimensions and installation guidance.
Reviews
Delivery Information