Hargreaves Halifax HD12047 300mm x 200mm Cast Iron Grey Pipe Taper
Product Code:
GIB01940
£402.18
£335.15
Unavailable for Online Ordering
Call for Availability300x200mm pipe taper for reducing a Halifax Drain run from 300mm down to 200mm.
- Reduction - Steps a run down from 300mm to 200mm nominal bore.
- Material - A grey iron casting to BS EN 877, protected by a 2-pack epoxy coating of at least 150 microns average thickness.
- Jointing - Connects using the 300mm coupling at the larger end and the 200mm coupling at the smaller end.
Read More
More Information
The Halifax HD12047 forms part of the Halifax Drain range: a 300x200mm pipe taper, used to step a run down from 300mm to 200mm nominal bore, for example where a branch or gully feeds into a smaller diameter main run.
Construction
- Material - A grey iron casting to BS EN 877, protected by a 2-pack epoxy coating of at least 150 microns average thickness.
- Jointing - The 300mm end connects using a standard 300mm Halifax coupling, and the 200mm end using a standard 200mm coupling.
Strength below ground
Buried pipework has to withstand more than its own weight: backfill loads and, in places, traffic loading above. Cast iron consistently exceeds the ring crush strength required by BS EN 877, giving it greater resistance to crushing than PVC or HDPE alternatives of the same diameter.
Full dimensions are set out in the manufacturer's Halifax Technical Guide.
Reviews
Delivery Information