Hargreaves Halifax HD4011 100mm Cast Iron Grey Long Radius Access Bend with Door 88 Degree
Product Code:
GIB01060
£103.49
£86.24
Unavailable for Online Ordering
Call for Availability100mm long radius bend at 88 degrees with a bolted access door, for a Halifax Drain run.
- Angle - 88 degree long radius bend with a bolted access door.
- Diameter - 100mm nominal bore, matching the Halifax Drain pipe range.
- Material - Grey cast iron to BS EN 877 with a minimum average 150 micron epoxy coating.
- Access - Bolted door allows rodding and clearance at the change of direction without disturbing the pipe run.
- Tooling - Access door bolts are undone with a 14mm socket.
Read More
More Information
The Halifax HD4011 is a 100mm, 88 degree long radius bend with a bolted access door from the Halifax Drain range, used to change the direction of a buried drainage run.
Design
- Why an access bend - BS EN 12056-2 recommends that access is provided where a drainage pipeline changes direction. Rather than fitting a separate access pipe alongside a plain bend, this fitting builds a bolted door into the bend itself, giving a rodding point exactly where it is most likely to be needed.
- Material - Grey cast iron to BS EN 877, coated internally and externally to a minimum average of 150 microns of 2-pack epoxy.
Installation
- Jointing - Connects to Halifax Drain pipes using the same ductile iron or push fit couplings as the rest of the range.
- Bedding - Should be laid and supported in line with the Halifax buried pipeline guidance, with 50mm clearance beneath each coupling joint.
- Tooling - The bolted access door is undone with a 14mm socket for rodding and inspection.
See the manufacturer's Halifax Technical Guide for full dimensions and installation guidance.
Reviews
Delivery Information