Hargreaves Halifax HD4032 100mm x 100mm Cast Iron Grey Radius Curve Access Branch with Door 88 Degree
Unavailable for Online Ordering
Call for Availability100x100mm radius curve branch with a bolted access door at 88 degrees, for bringing an additional Halifax Drain line into a run.
- Configuration - 100x100mm radius curve branch with a bolted access door at 88 degrees.
- Flow - Combines the same curved, low-turbulence junction as the radius curve branch with a bolted door, giving a rodding point at the junction itself.
- Material - Produced in grey cast iron under BS EN 877, with an epoxy finish averaging no less than 150 microns.
- Access - Bolted door at the junction, undone with a 14mm socket, for rodding without disturbing the run.
The Halifax HD4032 is one of the Halifax Drain range: a 100x100mm, 88 degree radius curve branch with a bolted access door used to bring an additional drainage line into a run.
Design
Combines the same curved, low-turbulence junction as the radius curve branch with a bolted door, giving a rodding point at the junction itself.
Construction
- Material - Produced in grey cast iron under BS EN 877, with an epoxy finish averaging no less than 150 microns.
- Access - A bolted door at the junction, undone with a 14mm socket, gives a rodding point without disturbing the run.
Service life
Correctly installed and maintained, cast iron drainage of this kind can remain in service for more than 100 years, and is fully recyclable without any loss of its original properties at the end of that life.
See the manufacturer's Halifax Technical Guide for full dimensions.