Hargreaves Halifax HD4043 100mm Cast Iron Grey Round Door Access Pipe
Unavailable for Online Ordering
Call for Availability100mm access pipe with a bolted round door, giving a rodding and inspection point along a straight Halifax Drain run.
- Access - Bolted round door built into a straight length of pipe for rodding and inspection.
- Diameter - 100mm nominal bore, matching the Halifax Drain range.
- Material - Grey cast iron to BS EN 877 with a minimum average 150 micron epoxy coating.
- Placement - Suits access points required by BS EN 12056-2 along long or junction heavy runs.
The Halifax HD4043 is a 100mm access pipe with a bolted round door, used to provide a rodding and inspection point within a straight length of buried drainage pipework.
Where access is needed
BS EN 12056-2 sets out general guidance that no part of a drain should be more than 45 metres from a manhole, with the distance between manholes not exceeding 90 metres, and that access should be provided on a branch drain within 12 metres of a junction where no manhole or inspection chamber exists. The HD4043 gives a straightforward way to add a rodding point mid run without a full inspection chamber.
Construction
- Material - Grey cast iron to BS EN 877.
- Door - Bolted round door, sealed with a gasket, giving access to the full bore of the pipe.
- Coating - Minimum average 150 microns of 2-pack epoxy.
Full dimensions are set out in the manufacturer's Halifax Technical Guide.