Hargreaves Halifax HD4052 100mm Cast Iron Grey Blank End Drilled and Tapped 2-Inch BSP
Unavailable for Online Ordering
Call for Availability100mm blank end, drilled and tapped to 2 inch BSP, for terminating a Halifax Drain run with a threaded connection point in reserve.
- Function - Blank end pre-drilled and tapped to a 2 inch BSP thread.
- Diameter - 100mm nominal bore, matching the Halifax Drain range.
- Material - Grey iron, cast and tested to BS EN 877, carrying a 2-pack epoxy coating of at least 150 microns on average.
- Use - The BSP thread suits a standard 2 inch threaded connection from a plastic or copper pipe system.
The Halifax HD4052 forms part of the Halifax Drain range: a 100mm blank end, drilled and tapped to a 2 inch BSP thread, combining a run termination with a ready-made connection point for a smaller bore system.
Why threaded
The Halifax system's threaded boss connections are designed to suit standard 2 inch BSPT threaded connections from plastic or copper pipework, giving a secure way of transitioning between smaller bore pipe systems and the Halifax Drain range. The HD4052 gives this option at the end of a run rather than part way through it.
Construction
- Material - Grey iron, cast and tested to BS EN 877, carrying a 2-pack epoxy coating of at least 150 microns on average.
Cutting on site
Where a length needs to be shortened on site, Hargreaves recommend a powered chop saw or disc cutter fitted with a metal cutting disc rather than a hand hacksaw; burrs should be removed and any exposed metal touched up with a high quality metal primer before the joint is made.
See the manufacturer's Halifax Technical Guide for further detail.