Hargreaves Halifax HD6015 150mm Cast Iron Grey Medium Radius Bend 45 Degree
Product Code:
GIB01390
£125.66
£104.72
Unavailable for Online Ordering
Call for Availability150mm medium radius bend at 45 degrees, for a Halifax Drain run.
- Angle - 45 degree medium radius bend.
- Diameter - 150mm nominal bore, matching the Halifax Drain pipe range.
- Material - Manufactured in grey cast iron to BS EN 877, with an average external epoxy coating of at least 150 microns.
- Design - The medium radius geometry sits between the short and long radius options, giving a flow path that is gentler than a short radius bend without the full footprint of a long radius fitting.
Read More
More Information
The Halifax HD6015 is drawn from the Halifax Drain range: a 150mm, 45 degree medium radius bend, used to change the direction of a buried drainage run.
Design
- Geometry - The medium radius geometry sits between the short and long radius options, giving a flow path that is gentler than a short radius bend without the full footprint of a long radius fitting.
- Material - Manufactured in grey cast iron to BS EN 877, with an average external epoxy coating of at least 150 microns.
Strength below ground
Buried pipework has to withstand more than its own weight: backfill loads and, in places, traffic loading above. Cast iron consistently exceeds the ring crush strength required by BS EN 877, giving it greater resistance to crushing than PVC or HDPE alternatives of the same diameter.
Installation
- Jointing - Connects to Halifax Drain pipes using the same ductile iron or push fit couplings as the rest of the range.
See the manufacturer's Halifax Technical Guide for full dimensions and installation guidance.
Reviews
Delivery Information