Hargreaves Halifax HD6027 150mm x 150mm Cast Iron Grey Y Branch 45 Degree
Unavailable for Online Ordering
Call for Availability150x150mm Y branch at 45 degrees, for bringing an additional Halifax Drain line into a run.
- Configuration - 150x150mm Y branch at 45 degrees.
- Flow - The 45 degree swept Y configuration joins branches in the direction of flow, the approach BS EN 12056-2 recommends where a large-radius sweep is not practical.
- Material - A grey iron casting to BS EN 877, protected by a 2-pack epoxy coating of at least 150 microns average thickness.
The Halifax HD6027 sits within the Halifax Drain range: a 150x150mm, 45 degree Y branch used to bring an additional drainage line into a run.
Design
The 45 degree swept Y configuration joins branches in the direction of flow, the approach BS EN 12056-2 recommends where a large-radius sweep is not practical.
Construction
- Material - A grey iron casting to BS EN 877, protected by a 2-pack epoxy coating of at least 150 microns average thickness.
Settlement
Where pipework leaves a building or manhole and may be subject to settlement, the guide recommends at least two joints within 600mm of the exit point, acting as a short rocker pipe; the couplings used across the Halifax system are designed to accommodate up to 3 degrees of deflection, which combines with this short pipe length to absorb movement without compromising the joint.
See the manufacturer's Halifax Technical Guide for full dimensions.