Hargreaves Halifax HD6032 150mm x 100mm Cast Iron Grey Radius Curve Access Branch with Door 88 Degree
Unavailable for Online Ordering
Call for Availability150x100mm radius curve branch with a bolted access door at 88 degrees, for bringing an additional Halifax Drain line into a run.
- Configuration - 150x100mm radius curve branch with a bolted access door at 88 degrees.
- Flow - Combines the same curved, low-turbulence junction as the radius curve branch with a bolted door, giving a rodding point at the junction itself.
- Material - Grey iron, cast and tested to BS EN 877, carrying a 2-pack epoxy coating of at least 150 microns on average.
- Access - Bolted door at the junction, undone with a 14mm socket, for rodding without disturbing the run.
The Halifax HD6032 sits within the Halifax Drain range: a 150x100mm, 88 degree radius curve branch with a bolted access door used to bring an additional drainage line into a run.
Design
Combines the same curved, low-turbulence junction as the radius curve branch with a bolted door, giving a rodding point at the junction itself.
Construction
- Material - Grey iron, cast and tested to BS EN 877, carrying a 2-pack epoxy coating of at least 150 microns on average.
- Access - A bolted door at the junction, undone with a 14mm socket, gives a rodding point without disturbing the run.
Regulatory background
Halifax Drain products sit within the framework of BS EN 752 (drain and sewer systems outside buildings) and BS EN 12056-2/3 (gravity drainage layout and calculations), and are referenced against Building Regulations requirements including Approved Document H1 (foul water drainage) and Regulation 7 (materials and workmanship).
See the manufacturer's Halifax Technical Guide for full dimensions.