Hargreaves Halifax HD6033 150mm x 150mm Cast Iron Grey Radius Curve Access Branch with Door 88 Degree
Unavailable for Online Ordering
Call for Availability150x150mm radius curve branch with a bolted access door at 88 degrees, for bringing an additional Halifax Drain line into a run.
- Configuration - 150x150mm radius curve branch with a bolted access door at 88 degrees.
- Flow - Combines the same curved, low-turbulence junction as the radius curve branch with a bolted door, giving a rodding point at the junction itself.
- Material - Formed from grey cast iron to the BS EN 877 specification, epoxy coated to an average minimum of 150 microns.
- Access - Bolted door at the junction, undone with a 14mm socket, for rodding without disturbing the run.
The Halifax HD6033 is drawn from the Halifax Drain range: a 150x150mm, 88 degree radius curve branch with a bolted access door used to bring an additional drainage line into a run.
Design
Combines the same curved, low-turbulence junction as the radius curve branch with a bolted door, giving a rodding point at the junction itself.
Construction
- Material - Formed from grey cast iron to the BS EN 877 specification, epoxy coated to an average minimum of 150 microns.
- Access - A bolted door at the junction, undone with a 14mm socket, gives a rodding point without disturbing the run.
Settlement
Where pipework leaves a building or manhole and may be subject to settlement, the guide recommends at least two joints within 600mm of the exit point, acting as a short rocker pipe; the couplings used across the Halifax system are designed to accommodate up to 3 degrees of deflection, which combines with this short pipe length to absorb movement without compromising the joint.
See the manufacturer's Halifax Technical Guide for full dimensions.