Hargreaves Halifax HD6038 150mm x 100mm Cast Iron Grey Double Radius Curve Branch 88 Degree
Unavailable for Online Ordering
Call for Availability150x100mm double branch with radius curve junctions at 88 degrees, for bringing an additional Halifax Drain line into a run.
- Configuration - 150x100mm double branch with radius curve junctions at 88 degrees.
- Flow - Brings two additional lines into a run using the same curved, low-turbulence junction as the single radius curve branch.
- Material - Cast in grey iron to the BS EN 877 standard, with a minimum average 150 micron 2-pack epoxy finish.
The Halifax HD6038 is one of the Halifax Drain range: a 150x100mm, 88 degree double branch with radius curve junctions used to bring an additional drainage line into a run.
Design
Brings two additional lines into a run using the same curved, low-turbulence junction as the single radius curve branch.
Construction
- Material - Cast in grey iron to the BS EN 877 standard, with a minimum average 150 micron 2-pack epoxy finish.
Cutting on site
Where a length needs to be shortened on site, Hargreaves recommend a powered chop saw or disc cutter fitted with a metal cutting disc rather than a hand hacksaw; burrs should be removed and any exposed metal touched up with a high quality metal primer before the joint is made.
See the manufacturer's Halifax Technical Guide for full dimensions.