Hargreaves Halifax HD6043 150mm Cast Iron Grey Round Door Access Pipe
Unavailable for Online Ordering
Call for Availability150mm access pipe with a bolted round door, giving a rodding and inspection point along a straight Halifax Drain run.
- Access - Bolted round door built into a straight length of pipe for rodding and inspection.
- Diameter - 150mm nominal bore, matching the Halifax Drain range.
- Material - Formed from grey cast iron to the BS EN 877 specification, epoxy coated to an average minimum of 150 microns.
The Halifax HD6043 is one of the Halifax Drain range: a 150mm access pipe with a bolted round door, used to provide a rodding and inspection point within a straight length of buried drainage pipework.
Where access is needed
BS EN 12056-2 sets out general guidance that no part of a drain should be more than 45 metres from a manhole, with the distance between manholes not exceeding 90 metres, and that access should be provided on a branch drain within 12 metres of a junction where no manhole or inspection chamber exists.
Construction
- Material - Formed from grey cast iron to the BS EN 877 specification, epoxy coated to an average minimum of 150 microns.
- Door - Bolted round door, sealed with a gasket, giving access to the full bore of the pipe.
Kitemark heritage
The Halifax system carries third party BSI Kitemark certification (No. 684754), confirming compliance with BS EN 877, alongside CE marking under the EU Construction Products Regulation and membership of SoPHE, the Society of Public Health Engineers within CIBSE.
Full dimensions are set out in the manufacturer's Halifax Technical Guide.