Hargreaves Halifax HD6048 150mm x 100mm Cast Iron Grey Pipe Taper
Product Code:
GIB01510
£83.39
£69.49
Unavailable for Online Ordering
Call for Availability150x100mm pipe taper for reducing a Halifax Drain run from 150mm down to 100mm.
- Reduction - Steps a run down from 150mm to 100mm nominal bore.
- Material - Produced in grey cast iron under BS EN 877, with an epoxy finish averaging no less than 150 microns.
- Jointing - Connects using the 150mm coupling at the larger end and the 100mm coupling at the smaller end.
Read More
More Information
The Halifax HD6048 sits within the Halifax Drain range: a 150x100mm pipe taper, used to step a run down from 150mm to 100mm nominal bore, for example where a branch or gully feeds into a smaller diameter main run.
Construction
- Material - Produced in grey cast iron under BS EN 877, with an epoxy finish averaging no less than 150 microns.
- Jointing - The 150mm end connects using a standard 150mm Halifax coupling, and the 100mm end using a standard 100mm coupling.
Regulatory background
Halifax Drain products sit within the framework of BS EN 752 (drain and sewer systems outside buildings) and BS EN 12056-2/3 (gravity drainage layout and calculations), and are referenced against Building Regulations requirements including Approved Document H1 (foul water drainage) and Regulation 7 (materials and workmanship).
Full dimensions are set out in the manufacturer's Halifax Technical Guide.
Reviews
Delivery Information