Hargreaves Halifax HD6050 150mm Cast Iron Grey P Trap with Bottom Access
Unavailable for Online Ordering
Call for Availability150mm P trap with a bottom access door, holding a water seal while allowing the trap itself to be cleared without dismantling it.
- Function - P trap providing a water seal to prevent foul air entering the building.
- Access - Bottom door allows the trap to be cleared of a blockage without dismantling it from the run.
- Diameter - 150mm nominal bore, matching the Halifax Drain range.
- Material - Grey cast iron construction to BS EN 877, finished with a 2-pack epoxy coating averaging 150 microns or more.
The Halifax HD6050 forms part of the Halifax Drain range: a 150mm P trap with a bottom access door, combining a water seal with a way to clear the trap itself without removing it from the pipe run.
Water seal
Building Regulations 2010 Approved Document H requires every trap in a drainage system to maintain a water seal of at least 25mm. The HD6050's geometry is designed to hold this seal in normal use, and the bottom access door gives a direct way to clear a blockage without unbolting the trap from the couplings either side.
Construction
- Material - Grey cast iron construction to BS EN 877, finished with a 2-pack epoxy coating averaging 150 microns or more.
Regulatory background
Halifax Drain products sit within the framework of BS EN 752 (drain and sewer systems outside buildings) and BS EN 12056-2/3 (gravity drainage layout and calculations), and are referenced against Building Regulations requirements including Approved Document H1 (foul water drainage) and Regulation 7 (materials and workmanship).
Full dimensions are set out in the manufacturer's Halifax Technical Guide.