Hargreaves Halifax HD6051 150mm Cast Iron Grey Blank End

The Halifax HD6051 belongs to the Halifax Drain range: a 150mm blank end used to seal off an unused branch or the end of a pipe run.

Construction

• Material - Cast in grey iron to the BS EN 877 standard, with a minimum average 150 micron 2-pack epoxy finish.
• Jointing - Fits inside a standard Halifax coupling in the same way as a pipe spigot, so a run can be extended later by removing the coupling and blank end.

Trench preparation

Halifax Drain pipework should be laid into an accurately trimmed trench with a flat, continuously supported base and 50mm clearance beneath each coupling joint; where accurate trimming is not possible, an additional 100mm of excavation allows a granular bed to be laid while keeping that same clearance.

See the manufacturer's Halifax Technical Guide for full dimensions.