Hargreaves Halifax HD6067 150mm Adjustable Steel Drain Pipe Bracket
Unavailable for Online Ordering
Call for AvailabilitySteel bracket sized for 150mm Halifax Drain pipe, wherever a run comes up out of the ground and needs holding against a wall or structure.
- Sizing - Made to suit 150mm Halifax Drain pipework at entry and exit points above the trench.
- Slot - Fixing slot takes a threaded rod, so the pipe's exact position can be adjusted while fitting it.
- Interval - Hargreaves' own guidance is a bracket every 1.5 metres on a horizontal run, tighter than the 3 metre maximum in BS EN 12056-2.
- Certification - A fixing accessory rather than a pressure-bearing part - outside the scope of the BS EN 877 standard and Kitemark.
Most of a Halifax Drain run stays buried, but wherever the 150mm pipe comes up out of the ground - through a wall, at a foundation, or along an exposed stretch - the HD6067 steel bracket is what holds it in place.
How far apart
BS EN 12056-2 sets a 3 metre maximum between supports on a horizontal run. Hargreaves' own guidance goes tighter still: a bracket every 1.5 metres, with the first one within 500mm of the nearest coupling, which makes the run easier to install and noticeably stiffer once it is up.
Fixing
- Slot - Takes a threaded rod through the fixing slot, so position can be fine-tuned while the pipe goes in.
Manufacturing quality
The Halifax Drain manufacturing site holds ISO 9001:2015 certification through the UKAS-accredited Beijing United Intelligence Certification Co. Ltd, and is separately audited by BSI as part of the Kitemark process. Samples from every delivery are checked for dimensional accuracy, coating quality and chemical and physical properties, over and above the requirements of the standard itself.
As a fixing accessory rather than a pressure-bearing pipe component, this bracket sits outside the scope of BS EN 877 and the Kitemark that cover the pipes and fittings themselves. See the manufacturer's Halifax Technical Guide for further installation guidance.