Hargreaves Halifax HD8026 200mm x 100mm Cast Iron Grey Y Branch 45 Degree
Unavailable for Online Ordering
Call for Availability200x100mm Y branch at 45 degrees, for bringing an additional Halifax Drain line into a run.
- Configuration - 200x100mm Y branch at 45 degrees.
- Flow - The 45 degree swept Y configuration joins branches in the direction of flow, the approach BS EN 12056-2 recommends where a large-radius sweep is not practical.
- Material - Produced in grey cast iron under BS EN 877, with an epoxy finish averaging no less than 150 microns.
The Halifax HD8026 is drawn from the Halifax Drain range: a 200x100mm, 45 degree Y branch used to bring an additional drainage line into a run.
Design
The 45 degree swept Y configuration joins branches in the direction of flow, the approach BS EN 12056-2 recommends where a large-radius sweep is not practical.
Construction
- Material - Produced in grey cast iron under BS EN 877, with an epoxy finish averaging no less than 150 microns.
Tensile grading
Every Halifax Drain pipe and fitting, aside from a handful of brackets and couplings, is cast in grey iron graded by tensile strength in accordance with BS EN 877, giving a considerable margin over the 20 to 40 percent tensile strength typical of equivalent PVC or HDPE pipework.
See the manufacturer's Halifax Technical Guide for full dimensions.